Today we put photos or postcards on the wall with wallpaper
What do we recommend?
Our picture hanger for photos and postcards uses a high-quality adhesive point to be held on the wall. This adhesive point can be adapted to the wall surface: Depending on the sensitivity, the adhesive force of the adhesive point can be reduced by half by touching the adhesive surface once with your finger.
Important for sensitive wall surfaces: If you have a sensitive wall surface, you can feel your way with the adhesive force and reduce the adhesive force by half: Simply touch the adhesive surface with your finger. Try to see if the adhesive strength is sufficient, otherwise you will use a different adhesive point.
Step 1
Mount the photo hangers on the top left and bottom right of your photo. Note: The adhesive point is already attached to the back of the picture hanger. On the other side of the picture hanger is the slot where the photo will be held later.
Step 2
Now go with the photo and the attached picture hangers to the place on your wall where the photo should hang.
Remove picture hangers glued to the wall
Important: Do not pull!
Please remove the photo and turn the picture hanger on the wall by 365 angular degree. If the adhesive point continues to stick to the wall, please roll it up with your finger from top to bottom. This is the only way to remove the glue point without damaging your wall.